This anvil stand is constructed of 1-1/4" steel schedule 80 pipe. Each leg is
set at an 8 degree angle for stability. The feet of each stand leg has 3/8" X 3"
circles welded to it. Leg length to suit the working height of the anvil.
The top frame is made of 1/4" X 2" X 3" angle. The center support frame can
be constructed of 1/4" X 2" flat bar.
Build to suit the size of your anvil. Inserted under the anvil is a plate cut
to fit the inside dimensions of the angle frame.
This anvil stabilizer/hold down is constructed as shown from materials found
around the shop that will serve the purpose.
If you need more information, you can email me at: brhlbsmt@mcttelecom.com Ralph Sproul
Downloadable/Printable Version